Using a Free Keyword Density Checker on Real Pages: A Worked Example

Most guides about keyword density stop at the formula. They tell you to divide occurrences by total words and multiply by 100, then they leave you to guess what the answer means on a real page. This keyword density checker worked example does the opposite. It runs the free keyword density checker on three real published pages, shows every count the tool returns, and then edits one real passage so you can see the numbers move. Nothing here is invented. Every count comes from the published text of a live LinkTrixx article, measured with a script and checked twice.
If you write content, commission content, or check content before it goes live, this walkthrough gives you a repeatable method. You will learn what keyword density is, why Google does not treat it as a ranking factor, what the search results actually show people asking, how the free tool works, and how to read its five results on your own pages. By the end you will know exactly when a number is a warning and when it is simply the shape of natural writing.
The three pages in this example are all live on linktrixx.com. The first is a service guide for plumbers. The second is the guide to the keyword density checker itself. The third is a service guide for coffee shops. Together they cover two different topics, two different article lengths, and one shared question: does the target phrase appear often enough for readers and search engines to understand the topic, without appearing so often that the writing feels forced?
What this keyword density checker worked example shows you
A worked example is only useful if you can repeat it. That is why every step below names the page, the phrase, the count, and the method. You can open the same three articles, paste the same text into the same keyword density checker, and you should get the same numbers, allowing for small differences if an article is updated after this post was published. Here is what the example covers, in order.
- The definition of keyword density and the formula, with three small calculations you can check in your head.
- What Google actually says about density, and why no official ideal percentage exists.
- What people really search for when they look for a keyword density checker, based on the live search results.
- How the free LinkTrixx tool works, including each of its five results and what each one tells you.
- The measured counts for three real LinkTrixx articles, with the target phrase, the total word count, the density, and the first and last position of each phrase.
- A before and after edit of one real 150 word passage, with the counts before the edit and the counts after it.
- A short routine you can run on every page before you publish it.
Read the whole example once, then keep it open as a reference while you check your own pages. The method matters more than any single number in this post, because your pages will have different topics, different lengths, and different target phrases. The numbers below are real, but they describe these three pages only. Your job is to learn the reading skill, not to copy the percentages.
What keyword density is, in plain words
Keyword density is the share of the words on a page taken up by one word or phrase, shown as a percentage. If a page has 1,000 words and your target phrase appears 10 times, the density is 1 percent. If the same phrase appears 20 times in the same 1,000 words, the density is 2 percent. The formula never changes, and it works for a single word and for a phrase of two or three words in exactly the same way.
Keyword density equals keyword occurrences divided by total words, multiplied by 100. That is the whole calculation. Three small examples make it concrete. A keyword that appears 3 times in 300 words has a density of 1 percent, because 3 divided by 300 is 0.01, and 0.01 times 100 is 1. A keyword that appears 10 times in a 1,000 word article also has a density of 1 percent. A keyword that appears 12 times in 800 words has a density of 1.5 percent, because 12 divided by 800 is 0.015. The same percentage can therefore describe very different amounts of repetition, which is why the total word count always matters when you read a density figure.
Three details change how the count works in practice. First, matching is case insensitive in the LinkTrixx tool, so Link Building and link building count as the same phrase. Second, a phrase is counted only when the whole phrase appears together, so the words link and building appearing separately do not count toward the phrase link building. Third, the denominator is the total number of words in the text you paste, including short words such as the, and, and of. That last point matters, because two tools can report different densities for the same page if one of them removes short words from the total before dividing. The LinkTrixx tool divides by the full word count, and the counts in this worked example use the same rule, so the numbers here and the numbers on the tool page agree.
It also helps to separate three ideas that people often mix up. Keyword frequency is the raw count, such as 38 occurrences. Keyword density is that count expressed as a percentage of the total words, such as 0.77 percent. Keyword prominence is about placement, such as whether the phrase appears in the title, in the first paragraph, or in a heading. A page can have a healthy density and still fail on prominence if the phrase never appears early, and a page can have strong prominence and a low density if the phrase appears once in the title and then never again. The free tool reports on frequency and density, and it also reports whether the keyword appears in the first 100 words, which is a simple prominence check built into the same result.
Single words, phrases, and why the phrase matters more
Most pages target a phrase, not a single word. A plumber targets link building for plumbers, a coffee shop targets link building for coffee shops, and a software company targets SaaS link building. Single word counts are still useful, because they show which words dominate a page, but the phrase count is the one that answers the real question: how often does the page say the thing it wants to rank for, in the exact words searchers use?
That is why the worked example below reports both. For each of the three pages you will see the count for the main phrase, the count for the shorter topic words around it, and the list of the most frequent words on the page. Read together, those three views tell you whether the page stays on topic, whether it repeats one phrase too often, and whether some other word has quietly taken over the page. A page about plumbers that mentions Google more often than plumbing has a topic problem, not a density problem, and only the word list reveals it.
Why the total word count changes everything
Density is a ratio, so the same count means something different on a short page and a long page. One occurrence of a phrase in a 100 word paragraph is a density of 1 percent. One occurrence in a 5,000 word guide is a density of 0.02 percent. That is why short passages produce dramatic percentages. A 150 word passage with 9 occurrences of one word shows a density of 6 percent, which looks alarming until you remember that the passage is only 150 words long. The same 9 occurrences spread across a 5,000 word article would be a density of 0.18 percent, which barely registers.
Keep that in mind when you read the before and after passage later in this post. The passage is short on purpose, so the percentages are high. The lesson is in the direction of the change and in the readability of the edited text, not in the absolute size of the percentages. On a full article, the same editing moves the density by a fraction of a percent, which is exactly how it should work. Small, natural edits are the goal. Large swings usually mean the passage was written for a search engine rather than a reader.
Does keyword density still matter for SEO
The honest answer is that keyword density matters as a writing check, not as a ranking factor. Google has never published an ideal keyword density, and Google spokespeople have said for years that density is not something to focus on. That position is consistent across the sources in this section, and it is the single most important fact in this whole post. If you remember one sentence, remember this one: no percentage unlocks a ranking.
Semrush explains keyword density as the percentage of times a keyword appears in a piece of content compared with the total word count, and notes that Google has never published a target percentage. Ahrefs makes the same point in its own guide to keyword density, and adds that the old 1 to 2 percent figures are a practitioner convention rather than a rule from Google. HubSpot describes keyword density in similar terms, as a measure of how often a keyword appears relative to the total words on a page. Yoast, which builds one of the most widely used SEO plugins for WordPress, also treats density as a guide for natural writing rather than a target to hit. Neil Patel covers the same ground, explaining the formula and warning against stuffing a page with repeated phrases.
The reason Google does not use density as a ranking signal is that modern search reads for meaning, not for term counts. Systems such as Hummingbird, RankBrain, BERT, and MUM, and the neural matching that powers AI Overviews, judge whether a page answers the question behind a search. A page can mention a phrase only a few times and still be the best answer, because it covers the topic in depth, uses related terms naturally, and earns links from other sites. A page can also mention a phrase fifty times and still fail, because repetition is not the same as relevance.
That does not make the number useless. Density is still the fastest way to catch two real problems. The first is underuse. A page that never mentions its target phrase, or mentions it once in 5,000 words, may not signal its topic clearly to readers or to search engines. The second is overuse. A page that repeats the same phrase in every sentence reads badly, and readers leave. Google spam policies describe keyword stuffing as filling pages with keywords or numbers in an attempt to manipulate rankings, and they list unnatural repetition among the examples. The policy describes the behaviour, not a percentage, which is why no tool can give you a safe number and a dangerous number with a clean line between them.
Google guidance on creating helpful, people first content points the same way. It asks whether content is genuinely useful, whether it was written for people rather than for search engines, and whether it demonstrates real experience with the topic. A density check supports that guidance. It does not replace it. Run the check, read the flagged passages aloud, and fix the writing. Do not tune the percentage and call the page done.
What the 1 to 2 percent range really is
Most guides quote a range of about 1 to 2 percent for a primary keyword, and some quote 0.5 to 2 percent. Those figures describe what naturally written content tends to land on, not a rule that Google enforces. A genuinely useful 1,500 word guide will often land near 1 percent for its main phrase without any effort, because the writer mentions the topic in the title, in the opening, in a heading or two, and in a handful of sentences where it is the most natural way to say something. The range is a description of that pattern. It is not a recipe, and chasing it directly usually makes the writing worse.
The three real pages measured later in this post show why. Their main phrase densities are 0.77 percent, 0.22 percent, and 0.73 percent. All three sit below the quoted 1 to 2 percent range for the exact phrase, and all three are normal, readable, published pages. The reason is simple: the exact phrase is long. A four word phrase such as link building for plumbers cannot appear as often as a single word such as plumbers without sounding forced. The single word counts tell the fuller story. On the plumbers page the word link appears 81 times, and on the guide page the word keyword appears 134 times. Shorter terms carry the topic while the full phrase appears where it fits naturally. Judging a long phrase against a range built for short phrases is a common mistake, and it leads writers to force repetitions that readers notice at once.
Density, stuffing, and the line between them
Keyword stuffing is not a percentage. It is a pattern of writing in which a phrase appears where no person would naturally put it. The signs are easy to spot when you read aloud. The same phrase opens three sentences in a row. A list exists only to hold keywords. A sentence repeats the full phrase twice when a pronoun would do. A paragraph mentions the city, the service, and the business name in every line. None of those problems needs a percentage to diagnose, and a percentage alone cannot prove any of them. A page can show 4 percent for a phrase and still read naturally if the topic genuinely requires repetition, and a page can show 1 percent and still be stuffed if every occurrence sits in an unnatural sentence.
Use the density figure as a prompt to read, not as a verdict. If the number is high, open the page and read the passages where the phrase appears. If the sentences sound like something a person would write, leave them alone. If they sound like they were written for a crawler, rewrite them with pronouns, synonyms, and shorter sentences. If the number is low, check whether the topic is clear from the title, the opening, and the headings. If it is clear, the low number is fine. If the page could be about anything, add the phrase where it genuinely helps the reader, such as the first paragraph and one heading, and check again.
What people actually search for about keyword density checkers
Before writing this worked example, the search results for the topic were checked directly. That step matters, because a blog that answers the wrong question does not rank, however well it is written. The results for keyword density checker, what is keyword density, and ideal keyword density show a consistent pattern, and the structure of this post follows it.
The top results fall into two groups. The first group is free tools. Pages from several independent tool sites offer a box to paste text into, and they report counts, densities, and phrase lists. The second group is guides. Those guides explain the formula, answer whether an ideal density exists, show a worked example, and explain how to fix stuffing without breaking the writing. Almost every guide in the top results carries a worked example of its own, usually a short paragraph with a small table of counts. That is the format searchers expect, and it is the format this post follows, with one difference: the examples here use real published pages instead of invented paragraphs.
The questions that appear again and again across those results are the same five. What is keyword density. How is keyword density calculated. What is a good keyword density. Is keyword density a ranking factor. How do you use a keyword density checker. The FAQ section at the end of this post answers six questions, including those five, in the same plain language the top results use. The headings in the body answer them in depth, so a reader who arrives with one question can find it quickly, and a reader who wants the full method can read from start to finish.
AI Overviews style answers for these queries follow the same shape. They state the formula first, then they state that Google has never published an ideal percentage, then they give the practitioner range of about 1 to 2 percent as a rough guide. That order is worth copying. Readers want the formula at once, then the honest answer about the ideal number, then the practical guidance. This post opens with the formula, gives the honest answer early, and spends the rest of its length on the practical part: real pages, real counts, and a real edit.
One more pattern from the results is worth noting. The strongest guides do not hide behind a single percentage. They show the tool, they show the result, and they show the edit. They also warn about the traps: pasting only part of an article, counting navigation and footer text as if it were article text, and comparing densities across tools that use different denominators. This worked example avoids all three traps. It uses the full body text of each article, it leaves out navigation and footer text, and it states the counting method plainly so the numbers can be checked.
Meet the free keyword density checker
The tool at the centre of this worked example is the free keyword density checker on linktrixx.com. It is one of the free SEO tools on the site, and it works entirely in your browser. There is no account to create, no install, and no limit on how many drafts you check. Your text is never sent to a server, saved, or shared, so you can check private drafts and client work safely. That matters more than it sounds. A density check is most useful on unpublished work, and a tool that uploads your draft to a server is the wrong place to paste it.
The tool page is simple on purpose. There is a large text box, a keyword box, and a results area that updates live as you type or paste. That live update is the feature you will use most. You can paste a draft, read the numbers, delete one repetition, and watch the density fall at once, without clicking anything. If you are comparing two versions of a passage, paste the first version, note the numbers, paste the second version, and compare. The whole check takes seconds, which is why it fits into a publishing routine instead of sitting outside it.
What the tool reports
The tool returns five results for the keyword you enter. Each one answers a different question, and the worked example below uses all five. Learning what each result means is the fastest way to get value from the tool, because a single percentage on its own tells you very little.
- Occurrence count. How many times your exact keyword or phrase appears in the text. This is the raw frequency, and it is the number the density is built from.
- Density percentage. The count divided by the total number of words in the text, multiplied by 100. This is the share of the text taken up by your phrase.
- Total word count. The number of words in the text you pasted. Read this first, because a density without a total is meaningless. A density of 6 percent on a 150 word passage and a density of 6 percent on a 5,000 word article describe completely different amounts of repetition.
- First and last position. Where your keyword first appears and where it last appears, counted in words from the start of the text. These two numbers show whether the phrase is spread through the page or bunched in one section. A phrase that first appears at word 3,000 in a 3,500 word article has a placement problem, even if its density looks fine.
- First 100 words check. Whether your keyword appears in the first 100 words of the text. This is a simple prominence check. Readers and search engines both use the opening of a page to work out what it is about, so a target phrase that never appears early is a signal worth acting on.
The tool also accepts single words and phrases. You can enter a single word such as seo, or a phrase such as link building, and it counts every exact match of that phrase. Matching is case insensitive, so Link Building and link building count the same. That is important for real drafts, where a phrase appears at the start of a sentence with a capital letter and in the middle of a sentence in lower case. A tool that counted those separately would undercount every phrase that starts a sentence.
Three extras on the tool page
Three small features on the tool page make the worked example easier to repeat. The first is Load sample. Clicking it fills the text box with example text and fills the keyword box with a sample keyword, so you can see how the five results work before you paste your own draft. Use it the first time you open the tool, then clear it and paste your own text. The second is Copy. It copies the results so you can paste them into a document, an email, or a client report. The third is Download. It saves the results as a text file for your records. If you check pages regularly, save one result file per page, with the date in the file name, so you can see how a page changes over time.
Once the density looks right, the tool page itself points you toward the next step. It links to the guide that explains the tool in full, which is the companion post to this worked example, and to the other free tools on the site, including the Word Counter and the Meta Tag Generator. The guide and this worked example cover the same tool from two angles. The guide explains the concept and the tool. This post shows the tool running on real pages. Read the guide first if you have never used a density checker. Read this post first if you want to see real numbers before you learn the theory. Either order works, because the two posts link to each other.
How to use the keyword density checker step by step
Follow these steps exactly the first time you run a check. After two or three checks you will do them without thinking, but the order matters, because each step protects the next one from a bad input. A density check is only as honest as the text you paste into it.
Step 1. Open the tool and paste the full body text
Open the keyword density checker in your browser. Paste the full body text of the page you want to check into the text box. Paste the whole article, not the first few paragraphs. A partial paste gives a wrong ratio, because the denominator is smaller than the real page and every phrase looks denser than it is. Leave out the navigation, the header, the footer, and any sidebar text. Those words are not part of the article, and counting them inflates the total and hides the real density of the writing. If you are checking a live page, copy the article text from the page itself, or paste from your draft document before you publish.
Step 2. Enter your target phrase exactly as searchers type it
Type the word or phrase you want to check in the keyword box, using the exact phrase your page is targeting. For a plumber that might be link building for plumbers. For a coffee shop it might be link building for coffee shops. For a software company it might be SaaS link building. Use the phrase your readers would type into Google, not a shorter version of it and not a longer version with extra words. If you are unsure which phrase to check, check the main phrase first, then check one or two close variations separately. The tool checks one phrase at a time, so run one check per phrase and note each result.
Step 3. Read the total word count first
Before you look at the density, read the total word count. This is the denominator, and it sets the meaning of every other number. A density of 2 percent on a 300 word page means the phrase appears 6 times. The same density on a 3,000 word page means it appears 60 times. Both are 2 percent, and they are completely different writing problems. If the total looks wrong, perhaps because you pasted only part of the article or you pasted the navigation as well, fix the text and check again before you trust any other number.
Step 4. Read the count, the density, and the positions together
Now read the occurrence count, the density percentage, the first position, the last position, and the first 100 words check as one result, not as five separate numbers. Ask four questions. How many times does the phrase appear. What share of the text is that. Does the phrase appear early, and does it appear again near the end. Is it spread through the page, or does it bunch in one section. A phrase that appears 30 times across 5,000 words, first at word 96 and last at word 4,870, is spread naturally through a long guide. A phrase that appears 30 times in the first 500 words of the same guide and never again is bunched, and the density alone would never tell you that.
Step 5. Read the flagged passages aloud
If a number surprises you, open the draft and find the passages where the phrase appears. Read them aloud. If a sentence sounds odd when spoken, rewrite it with a pronoun, a synonym, or a shorter sentence. If the phrase appears in a heading, a list, and three sentences in a row, spread it out. This is the step most people skip, and it is the step that actually improves the page. The tool shows you the number. Only reading shows you the problem.
Step 6. Edit, paste again, and compare
Make your edits in your draft, then paste the revised text into the tool and compare the new numbers with the old ones. Save both sets of numbers if you are reporting to a client or tracking a page over time, using the Copy button or the Download button on the tool page. A small move is a good sign. If a short passage falls from 6 percent to about 1.3 percent after you replace a few repetitions, as the passage in this worked example does, the edit worked. If a full article moves by a fraction of a percent after a careful edit, that is also a good sign. Large swings on a full article usually mean you deleted too much or added too much at once.
The worked example, part one: three real LinkTrixx pages measured
This is the part of the post where the numbers are real. Three published LinkTrixx articles were fetched through the WordPress REST API, the HTML was stripped away to leave the body text only, and every keyword occurrence was counted with a script. The method is stated here in full, so anyone can repeat it and check the figures.
The method, stated plainly
Each article was fetched from the WordPress REST API at the posts address for its slug. The rendered content was taken, script and style blocks were removed, all HTML tags were stripped, and the remaining text was collapsed to single spaces. That left the body text only: the words a reader sees in the article, without navigation, header, footer, or sidebar text. Word counts were taken from that cleaned text. Occurrences were counted with a case insensitive exact phrase match, using word boundaries, so Link Building at the start of a sentence and link building in the middle of a sentence both count, while a longer word that merely contains the phrase does not. Density is occurrences divided by total words, multiplied by 100, and shown to two decimal places. First and last positions are word numbers counted from the start of the body text. The same method was used for all three articles, so the figures are directly comparable.
Two notes on the numbers before you read them. First, the counts include headings inside the article, because headings are part of the body text a reader sees. Second, the counts were taken from the published text on 9 November 2026. If an article is edited after that date, its counts will change, and a fresh check will show the new figures. That is normal. A density check is a snapshot of a page on a day, not a permanent property of the page.
Page one: Link Building for Plumbers That Books More Jobs
The first page is Link Building for Plumbers That Books More Jobs, a service guide for plumbing firms. Its body text is 4,942 words long. The target phrase is link building, and the longer phrase link building for plumbers is the full topic phrase for the page. Here are the measured counts.
| Phrase checked | Occurrences | Density |
|---|---|---|
| link building | 38 | 0.77 percent |
| plumbers | 15 | 0.30 percent |
| link building for plumbers | 2 | 0.04 percent |
| backlinks | 4 | 0.08 percent |
The phrase link building first appears at word 96 and last appears at word 4,870, so it runs almost the whole length of the article. It appears once in the first 100 words, in the sentence that names the problem the guide solves. The ten most frequent words on the page are link with 81 occurrences, links with 70, local with 70, plumbing with 48, building with 41, firm with 39, google with 31, guide with 29, search with 26, and plumber with 26. Read together, those words describe the page accurately: local links for plumbing firms, with Google and search as the reason the work matters.
What does 0.77 percent mean here. It means the phrase appears about once every 130 words, which is a natural rate for a long guide. The full four word phrase appears only twice, which is also natural. A four word phrase is long, and repeating it often would sound forced. The shorter words carry the topic instead: link appears 81 times, links 70 times, and plumbing 48 times. A reader never doubts what the page is about, even though the full phrase is rare. That is the pattern to look for on your own pages. A low density for a long phrase is fine when the shorter topic words are frequent and the phrase appears early and late.
Page two: How to Use a Free Keyword Density Checker for Better On Page SEO
The second page is How to Use a Free Keyword Density Checker for Better On Page SEO, the guide to the tool itself. Its body text is 7,325 words long, the longest of the three pages. The target phrase is keyword density checker, and the shorter phrases keyword density and keyword are the topic words around it. Here are the measured counts.
| Phrase checked | Occurrences | Density |
|---|---|---|
| keyword density checker | 16 | 0.22 percent |
| keyword density | 36 | 0.49 percent |
| keyword | 134 | 1.83 percent |
| density | 114 | 1.56 percent |
The phrase keyword density checker first appears at word 3 and last appears at word 7,228, so it runs the full length of the article. It appears twice in the first 100 words: once in the opening sentence, and once in the sentence that explains what the guide covers. The ten most frequent words on the page are keyword with 134 occurrences, density with 114, page with 89, percent with 67, check with 57, phrase with 51, word with 49, first with 47, draft with 45, and text with 43. Those words describe a guide about checking drafts, which is exactly what the page is.
This page is the most useful of the three for understanding how single words and phrases behave differently. The full three word phrase sits at 0.22 percent, which looks very low against the quoted 1 to 2 percent range. The single word keyword sits at 1.83 percent, which sits inside that range. Both numbers describe the same page. The difference is length. A three word phrase cannot appear as often as a single word without sounding repetitive, so the full phrase stays rare while the single word does the heavy lifting. If you judged this page by the phrase density alone, you would wrongly conclude that it barely mentions its topic. If you judged it by the single word density alone, you would miss the fact that the full phrase appears only 16 times in 7,325 words. Read both, and the picture is clear: the page is thoroughly on topic, the phrase appears at the start and at the end, and the writing stays natural because the author varies the wording.
There is one more lesson in this page. The word percent appears 67 times, which is high for a word that carries no topic meaning. It appears so often because the guide explains the formula, works through examples, and discusses ranges throughout. That is a sign of a page that teaches a calculation, not a sign of a problem. Context always matters more than a single count. A frequent word is only a problem if it crowds out the topic words or if it appears in unnatural sentences. Here it does neither.
Page three: Link Building for Coffee Shops That Fills More Tables
The third page is Link Building for Coffee Shops That Fills More Tables, a service guide for cafes. Its body text is 4,370 words long. The target phrase is link building, and the longer phrase link building for coffee shops is the full topic phrase for the page. Here are the measured counts.
| Phrase checked | Occurrences | Density |
|---|---|---|
| link building | 32 | 0.73 percent |
| coffee shops | 15 | 0.34 percent |
| link building for coffee shops | 2 | 0.05 percent |
| backlinks | 4 | 0.09 percent |
The phrase link building first appears at word 76 and last appears at word 4,300, so it runs almost the whole length of the article. It appears twice in the first 100 words, in the two sentences that name the problem and define the solution. The ten most frequent words on the page are link with 74 occurrences, local with 67, links with 62, coffee with 47, cafe with 47, building with 39, google with 30, shop with 23, business with 22, and how with 21. Those words describe the page accurately: local links for coffee shops and cafes, with Google as the reason the work matters.
Compare this page with the plumbers page and the pattern is striking. The two service guides are different topics, different lengths, and different audiences, yet their numbers are close. Link building sits at 0.77 percent on the plumbers page and 0.73 percent on the coffee shops page. The full topic phrase appears twice on each page. Backlinks appears 4 times on each page. The topic words appear 15 times on each page. That similarity is not a coincidence. Both pages were written to the same structure, with the same approach to natural repetition: name the problem early, use the phrase where it fits, vary the wording with synonyms and pronouns, and let the shorter topic words carry the weight. When two pages written the same way produce nearly the same densities, the method is consistent, and consistency is what a density check is for.
Reading the three pages together
Put the three pages side by side and four conclusions stand out. First, the main phrase density on a real, published, readable page can sit well below 1 percent, and that is normal. The three phrase densities are 0.77 percent, 0.22 percent, and 0.73 percent. None of them reaches the quoted 1 to 2 percent range, and none of the three pages has a topic problem. The range describes single words and short phrases in typical articles. Long phrases behave differently, and judging them against the same range leads to forced repetition.
Second, the single word counts tell the story the phrase counts miss. Keyword at 1.83 percent and density at 1.56 percent show that the guide page is thoroughly on topic, even though its full phrase sits at 0.22 percent. Link at 81 occurrences on the plumbers page and 74 on the coffee shops page shows the same thing. Always check the single words as well as the phrase. If you check only the phrase, you will understate how on topic a page is. If you check only the single words, you will miss whether the exact phrase searchers type ever appears.
Third, placement is strong on all three pages. Every phrase appears in the first 100 words, and every phrase appears again near the end. The first positions are word 96, word 3, and word 76. The last positions are word 4,870 of 4,942, word 7,228 of 7,325, and word 4,300 of 4,370. That spread is what a good result looks like. A phrase that appears early, appears late, and appears in between is woven through the page. A phrase that appears only in one section is not, whatever its density says.
Fourth, the word lists confirm the topics. Plumbers, coffee, cafe, keyword, density, local, google, and search all appear where they should. No surprise word dominates any of the three pages, and no topic word is missing. That is the quickest check of all. Before you worry about a percentage, look at the ten most frequent words. If they describe the page, the page is on topic. If they do not, fix the writing before you touch the density.
The worked example, part two: the before and after passage edit
Counts for a whole article are useful, but an edit happens in a passage, not in an article. This section takes one real 150 word passage from the keyword density checker guide, counts it exactly as it was published, edits it to reduce repetition, and counts it again. Both versions are shown in full, with the counts beside them, so you can judge the edit for yourself.
The passage before the edit
The passage below is a 150 word window taken from the middle of the guide, starting at word 1,021 of the body text. It begins mid sentence and ends mid sentence, because it is a window cut from a longer article rather than a standalone paragraph. The wording is exactly as published, including the headings that sit inside the body text. Here it is:
on the page, while others check only the one keyword you enter. The LinkTrixx tool takes the focused approach: one text, one keyword, five clear results. That focus is deliberate. Most writers checking a draft have one target phrase in mind, and they want a direct answer about that phrase, not a table of hundreds of phrases to sort through. How keyword density is calculated The formula is simple arithmetic. Divide the number of times your keyword appears by the total number of words in your text, then multiply by 100. The result is the density as a percentage. Keyword density equals keyword occurrences divided by total words, multiplied by 100. A keyword that appears 3 times in 300 words has a density of 1 percent. The same keyword appearing 10 times in a 1,000 word article also has a density of 1 percent. A keyword appearing 5 times in
Counted with the same method as the full articles, this passage is 150 words long. The word keyword appears 9 times, which is a density of 6.00 percent. The phrase keyword density appears 2 times, which is a density of 1.33 percent. Nine occurrences of one word in 150 words is a lot. Read the passage aloud and you can hear it. The word keyword opens sentence after sentence, and the passage feels like it is explaining the same idea three times in slightly different words. On a short passage the percentage looks dramatic, and the reading confirms that the repetition is real, not just an artefact of the small denominator.
What was changed, and why
The edit keeps every fact and every number in the passage. Nothing was deleted for the sake of the count. Five changes were made, each one replacing a repetition with a word the reader already understands from context.
- The one keyword you enter became the one term you enter, because the sentence already says the reader is checking a draft, so term is clear.
- One text, one keyword became one text, one target phrase, because the passage uses target phrase two sentences later, so the wording stays consistent.
- About that phrase became about it, because the sentence already names the target phrase, so the pronoun is clear.
- Your keyword appears became your target phrase appears, which varies the wording without changing the meaning.
- Keyword density equals keyword occurrences became Density equals occurrences, because the heading just above already names keyword density, so repeating both words adds nothing.
- The same keyword appearing and A keyword appearing became The same term appearing and A term appearing, because the examples are about any term, not about one specific word.
Two occurrences of the word keyword were kept on purpose. The first is in the heading How keyword density is calculated, because a heading should name its topic plainly. The second is in the sentence A keyword that appears 3 times in 300 words, because that sentence introduces the first worked calculation and the word belongs there. Keeping those two means the passage still names its topic clearly, while the surrounding repetition is gone. That is the balance to aim for: keep the occurrences that help the reader, remove the ones that only repeat what the reader already knows.
The passage after the edit
Here is the edited passage, with the same facts, the same numbers, and the same length, give or take one word:
on the page, while others check only the one term you enter. The LinkTrixx tool takes the focused approach: one text, one target phrase, five clear results. That focus is deliberate. Most writers checking a draft have one target phrase in mind, and they want a direct answer about it, not a table of hundreds of phrases to sort through. How keyword density is calculated The formula is simple arithmetic. Divide the number of times your target phrase appears by the total number of words in your text, then multiply by 100. The result is the density as a percentage. Density equals occurrences divided by total words, multiplied by 100. A keyword that appears 3 times in 300 words has a density of 1 percent. The same term appearing 10 times in a 1,000 word article also has a density of 1 percent. A term appearing 5 times in
Counted with the same method, the edited passage is 149 words long. The word keyword appears 2 times, which is a density of 1.34 percent. The phrase keyword density appears 1 time, which is a density of 0.67 percent. The table below puts the two versions side by side.
| Measure | Before the edit | After the edit |
|---|---|---|
| Total words | 150 | 149 |
| Occurrences of keyword | 9 | 2 |
| Density of keyword | 6.00 percent | 1.34 percent |
| Occurrences of keyword density | 2 | 1 |
| Density of keyword density | 1.33 percent | 0.67 percent |
Read the edited passage aloud and the difference is clear. The facts are identical. The formula is identical. The examples are identical. The only change is that the word keyword stops interrupting every sentence. That is what a density edit should feel like. If an edit changes the meaning, it is the wrong edit. If an edit removes a fact to hit a number, it is the wrong edit. If an edit only replaces repetitions with words the reader already understands, it is the right edit, and the density will fall on its own as a side effect.
What this edit would do to the full article
On the full 7,325 word guide, removing 7 occurrences of the word keyword would move its density from 1.83 percent to 1.73 percent. That is a small move, and it is exactly what you should expect. A single passage edit barely moves a long article, because the article is long. That is a useful reality check. If you edit one passage and the whole article density collapses, you probably edited too much, or the article was short to begin with. If you edit carefully across several passages, the density falls gradually, and the reading improves at each step. Aim for gradual improvement, not for a dramatic number.
What good keyword placement looks like
Density is only half the story. Placement is the other half, and the three measured pages show what good placement looks like in practice. Use the four checks below on your own pages, alongside the density figure.
Place the phrase in the title and the opening
Every one of the three measured pages names its topic in the title and again in the first 100 words. The plumbers page places link building at word 96. The guide places keyword density checker at word 3. The coffee shops page places link building at word 76. Readers decide in the first seconds whether a page is what they searched for, and the opening is where they look. If your target phrase never appears in the first 100 words, add it to the opening paragraph where it fits naturally, and check the keyword density checker again. Do not force it into the first sentence if the first sentence works better without it. Second or third sentence is fine, as long as it appears early.
Place the phrase in one or two headings
A heading tells readers what the next section covers, and it tells search engines the same thing. Use the target phrase in one or two headings where it is the most natural way to name the section. Do not put it in every heading. A page with the same phrase in six headings reads like a list of variations on one idea, and it wastes headings that could have named useful subtopics. On the guide page, the phrase appears in headings such as How keyword density is calculated, which is a natural heading because the section explains the calculation. That is the standard: the heading should be useful even if you remove the keyword from it.
Spread the phrase through the page
Compare the first and last positions on the tool result. A healthy spread looks like the three measured pages: first near the start, last near the end, with occurrences in between. A bunched result looks different: first at word 200, last at word 800, in a 4,000 word article. That pattern means the phrase appears in one section and never again, which usually means the rest of the page drifted away from the topic. Fix it by checking whether the later sections still serve the topic. If they do, add the phrase where it fits. If they do not, the problem is the structure of the page, not the density, and no amount of repetition will fix it.
Vary the wording around the phrase
Readers notice exact repetition faster than any tool does. Vary the wording with synonyms, pronouns, and shorter forms of the phrase. Link building can become building links, earning links, or the work, depending on the sentence. Keyword density can become density, the figure, or the percentage, when the context is clear. The plumbers page does this well: the phrase link building appears 38 times, but the words link, links, local, and plumbing appear far more often, so the page stays on topic without repeating one phrase. The guide page does the same with keyword, density, phrase, and draft. Variation is not a trick to fool a checker. It is how people write naturally, and it is what the checker is measuring when it reports a lower density for the exact phrase and a higher density for the topic words.
Common mistakes when using a keyword density checker
Most mistakes with a density checker are not about the tool. They are about the text that goes into it, or about what the user does with the result. Avoid these seven, and your checks will be honest.
Mistake 1. Pasting only part of the article
A partial paste gives a wrong ratio. If you paste the first 500 words of a 5,000 word article, every phrase in those 500 words looks ten times denser than it is on the real page. Always paste the full body text. If you are checking a draft, paste the whole draft. If you are checking a live page, copy the whole article text.
Mistake 2. Counting navigation and footer text
Navigation links, footer text, and sidebar widgets repeat the same words on every page of a site. If you paste them with the article, they inflate the total word count and add occurrences of words that have nothing to do with the article. Paste the article body only. The worked example in this post used body text only for exactly this reason.
Mistake 3. Chasing a magic percentage
There is no ideal density, and Google has never published one. A page at 0.22 percent for its full phrase can be perfectly fine, as the guide page in this example shows. A page at 2 percent can still read badly if every occurrence sits in an unnatural sentence. Use the number from the keyword density checker as a prompt to read, not as a target to hit. If you find yourself adding a phrase solely to reach 1 percent, stop. The writing is telling you the phrase does not belong there.
Mistake 4. Checking only the full phrase
The full phrase is the most important single check, but it is not the whole story. Check the shorter topic words as well. On the guide page the full phrase sits at 0.22 percent while the word keyword sits at 1.83 percent. Checking only the phrase would understate the topic coverage. Checking only the single word would miss whether the exact phrase ever appears. Check both, and read them together.
Mistake 5. Comparing densities across tools that count differently
Tools do not share one standard. Some divide by every word on the page. Others divide only by the words left after removing short words. Some count phrases of two and three words. Others count single words only. Some match case sensitively. Others do not. Two tools can therefore report different densities for the same page, and both can be correct under their own rules. Pick one tool, learn its method, and compare your pages against each other using that tool. Do not compare a number from one tool with a number from another and treat the difference as a finding.
Mistake 6. Editing the number instead of the writing
The fastest way to lower a density is to delete occurrences, and it is also the worst way. Deleting a phrase from a sentence that needs it makes the sentence worse. Replacing a repetition with a pronoun or a synonym makes the sentence better and lowers the density as a side effect. Always edit the writing first. The before and after passage in this post shows the difference. Nothing was deleted for the sake of the count. Repetitions were replaced with words the reader already understood.
Mistake 7. Checking once and never again
Pages change. An edit adds a section, a rewrite shortens an introduction, a new heading repeats the phrase three more times. Each change moves the numbers. Run the check again after any substantial edit, and run it once more before you publish. It takes seconds, and it catches the drift that creeps in during editing. Save the result each time with the Copy button or the Download button, so you can see how the page moved.
Free keyword density checker vs paid SEO tools
A free checker answers one question: how often does this phrase appear in this text. Paid tools answer more questions, and they charge for the extra answers. Knowing what each one does helps you choose the right tool for the job, instead of paying for features you do not need or struggling with a free tool that was never built for the task.
Paid suites such as Semrush and Ahrefs include density checks inside much larger platforms. They track rankings, audit whole sites, analyse competitors, and report on backlinks. A density figure inside one of those platforms sits beside hundreds of other metrics, which is useful when you are auditing a site, but it is slower when you only want to check one draft before you publish it. The free keyword density checker does the opposite. It opens at once, it checks one text and one phrase, and it gives you five clear results with no account and no waiting. For a pre publish check, that focus is an advantage, not a limitation.
Yoast sits in the middle. It is a WordPress plugin that checks a page while you write it, and it reports on keyword use, readability, and other on page factors together. That is useful inside WordPress, but it only works on pages you are editing in WordPress, and its checks run against its own rules. A browser based checker works on any text, from any source, including drafts in a document, pages from another site, and text a client sent by email. The two approaches complement each other. Use Yoast while you write in WordPress, and use the free checker for everything else, or as a second opinion before you publish.
The honest comparison is about scope, not quality. A free checker does not track rankings, it does not audit a whole site, and it does not show what competitors rank for. It was never built to do those things. What it does, it does quickly and privately, with no account and no cost. If you need competitor data and rank tracking, a paid suite is the right choice. If you need to check whether a draft repeats a phrase too often, the free checker is the faster choice, and the worked example in this post shows exactly what its results look like on real pages.
The same logic applies to the other free tools on the site. A comparison of the free meta tag generator against paid SEO tools reaches the same conclusion: free tools win on speed and simplicity for a single task, paid tools win when you need a whole platform. A worked example using the word counter on real pages shows the same pattern for word counts. Use the free tool for the check, use the paid platform for the programme, and do not confuse the two jobs.
When to pay, and when the free checker is enough
Pay for a suite when you need rank tracking across many pages, competitor analysis, site audits, or backlink data. Those are platform jobs, and a single purpose checker cannot do them. Stay with the free checker when your job is to check one draft, one page, or one passage. Writers, editors, and small teams usually need the second job far more often than the first, which is why a free checker earns its place in a daily routine even when a paid suite is also available. The two tools do not compete. They cover different parts of the same workflow.
How density checks fit link building
A density check improves the page. Link building improves the authority of the page. The two jobs are separate, and both are necessary, because a well written page without links struggles to rank, and a heavily linked page with poor writing struggles to keep readers. The tool page itself makes this point, and it is worth repeating here, because many writers treat on page checks as a substitute for links, or treat links as a substitute for good writing. Neither substitution works.
Search engines use keywords to work out what a page is about, and they use links from other sites as evidence that the page is worth trusting. A page that never mentions its target phrase can struggle to rank for it, however many links it has. A page that repeats the phrase in every sentence reads badly and can look like spam, however many links point to it. The balance is the goal: clear topic signals on the page, natural writing that keeps readers, and editorial links from real publications that show other sites trust the page.
That is where LinkTrixx services fit into the workflow this post describes. Once a page reads well and its density is sensible, the next step is to earn links to it. Link building services cover the full process, from competitor gap analysis to placement. White label link building covers the same work for agencies that resell it under their own brand. SaaS link building covers product and comparison pages for software companies. Guest posting earns placements on relevant sites in the same niche as the page. Each service starts from the same point: a page that is worth linking to, which is what the density check helps you produce.
The three measured pages are all service guides, and they show how the same method applies across niches. The plumbers guide and the coffee shops guide follow the same structure, and their densities are close, which shows the method is consistent. The same approach works for other local service niches, such as link building for landscaping companies, link building for roofing companies, link building for moving companies, and link building for solar companies. It also works for online stores, as the guide to link building for ecommerce stores shows. In each niche the topic words change, but the checks stay the same: paste the full body text, read the total first, check the phrase and the single words together, read the flagged passages aloud, and edit the writing rather than the number.
A repeatable weekly routine for density checks
A density check is most useful when it is routine rather than occasional. The routine below takes a few minutes per page, and it fits into a normal publishing workflow without slowing it down. Run it on every new page before you publish, and on any existing page after a substantial edit.
- Write the draft first, without thinking about density. Write for the reader, use the target phrase where it fits naturally, and finish the draft before you open the tool.
- Open the keyword density checker and paste the full body text. Enter the target phrase exactly as searchers type it.
- Read the total word count first. If it looks wrong, fix the pasted text and check again.
- Read the count, the density, the first position, the last position, and the first 100 words check together. Note all five numbers, using the Copy button or the Download button if you want a record.
- Check one or two close variations of the phrase, and check the single topic words, so you see the full picture rather than one number.
- Open the draft and read aloud every passage where the phrase appears more than once. Rewrite the repetitions with pronouns, synonyms, or shorter sentences.
- Paste the revised text into the tool and compare the new numbers with the old ones. A small move is a good sign.
- Check the other on page basics with the free tools on the site, including the Word Counter, the Title Tag Checker, the Meta Tag Generator, and the Robots.txt Generator. The full set is listed on the free SEO tools hub.
- Submit the published page for indexing, share it where your readers are, and start earning links to it. The density check is done. The promotion begins.
Keep a simple log of your checks. One line per page, with the date, the phrase, the count, the density, and the first and last positions, is enough. Over weeks the log shows which writers repeat phrases often, which topics produce high densities naturally, and which pages drift after edits. That log is more useful than any single check, because it turns a one off number into a pattern you can act on. The worked example in this post is one entry in that kind of log, written out in full so you can see the method before you start your own.
If you are new to these checks, start with the guide that explains the tool, then return to this worked example and repeat it on your own pages. The guide is how to use a free keyword density checker, and the word counter has its own worked example at word counter worked example. Together the three posts cover the concept, the tool, and the real numbers, and they link to each other so you can move between them without searching again.
Frequently asked questions
What is a keyword density checker worked example?
A keyword density checker worked example runs a density checker on a real page and shows every number it returns, with the method stated plainly. This post runs the free LinkTrixx keyword density checker on three real published articles, reports the exact counts, densities, and first and last positions, and then edits one real 150 word passage so you can see the numbers move from 9 occurrences of the word keyword to 2. The point of a worked example is that you can repeat it. The pages, the phrases, and the counting method are all named, so you can open the same articles and get the same figures.
How do you calculate keyword density?
Divide the number of times your keyword appears by the total number of words in the text, then multiply by 100. A keyword that appears 3 times in 300 words has a density of 1 percent. A keyword that appears 10 times in a 1,000 word article also has a density of 1 percent. A keyword that appears 12 times in 800 words has a density of 1.5 percent. The LinkTrixx keyword density checker does this calculation for you, and it also reports the occurrence count, the total word count, the first and last position of the keyword, and whether the keyword appears in the first 100 words.
What is a good keyword density?
There is no official ideal keyword density, and Google has never published one. Most guides describe a range of about 1 to 2 percent for a primary keyword as a rough guide, based on what naturally written content tends to land on. The three real pages in this worked example show why the range is only a guide. Their main phrase densities are 0.77 percent, 0.22 percent, and 0.73 percent, all below 1 percent, and all three pages are normal, readable, published guides. Long phrases naturally sit lower than single words, so judge a long phrase against its own behaviour, not against a range built for short phrases, and always read the flagged passages aloud before you act on a number.
Is keyword density a ranking factor?
No. Google has never listed keyword density as a ranking factor, and Google spokespeople have said for years that it is not something to focus on. Modern search reads for meaning, using systems that judge whether a page answers the question behind a search, rather than counting how often a phrase appears. Density still matters as a writing check, because it catches underuse, where a page barely mentions its topic, and overuse, where a page repeats a phrase so often that it reads badly. Google spam policies describe keyword stuffing as a behaviour, filling pages with keywords to manipulate rankings, not as a percentage, so treat the number as a prompt to read the writing, not as a target to hit.
Does the free keyword density checker save or upload my text?
No. The free LinkTrixx keyword density checker runs entirely in your browser. Your text is never sent to a server, saved, or shared, so you can check private drafts and client work safely. There is no account to create, no install, and no limit on how many drafts you check. You can copy the results with the Copy button, or save them as a text file with the Download button, for your records or a client report.
How do I fix keyword stuffing without removing my target phrase?
Replace repetitions with words the reader already understands, instead of deleting the phrase outright. Use pronouns, synonyms, and shorter forms of the phrase where the context is clear. Keep the occurrences that help the reader, such as the phrase in the title, in the first 100 words, and in one or two headings, and remove the ones that only repeat what the reader already knows. The before and after passage in this worked example shows the method: 9 occurrences of the word keyword in 150 words fell to 2, a density of 6.00 percent fell to 1.34 percent, and every fact in the passage stayed exactly the same. Paste the revised text into the checker and compare the new numbers with the old ones before you publish.